#LG LS775 QUALCOMM HS USB QDLOADER 9008 HOW TO#
#LG LS775 QUALCOMM HS USB QDLOADER 9008 INSTALL#
#LG LS775 QUALCOMM HS USB QDLOADER 9008 DRIVERS#
#LG LS775 QUALCOMM HS USB QDLOADER 9008 ARCHIVE#
#LG LS775 QUALCOMM HS USB QDLOADER 9008 ANDROID#

down, Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.ĭon´t forget to hit that thanks button if it helped you. If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. Now go to Pit tab and select the downloaded pit file.

Make sure that these are the only checked options. tar file and wait a few minutes.Ĭlick on Options and check Auto Reboot, Re-Partition and F. Your phone should now boot in Download Mode.ĭownload Odin and click on AP and select the.

and if it won´t work,repeat the last step until you do it right. With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.Ĭlick Recover Device and drag the files in the folder mentioned above and click overwrite very fast. This is the most important step because we will flash the stock boot files for our device. Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step. Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell. Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else. Next,go to Control Panel,choose Folder Options and check Show hidden files. Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008

#LG LS775 QUALCOMM HS USB QDLOADER 9008 INSTALL#

Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED. If it does,disconnect it from your computer.īefore installing the drivers,we need to disable driver signature enforcement.įirst,press WinKey + C and choose Settings Make sure that your device is connected and in Device Manager, it show as QHSUSB_DLOAD. Then press and hold the Power and Volume Up keys for around 20 seconds. So first off, make sure to unplug your device from the PC. If that is the case, then your device is indeed booted to EDL and you may then proceed with the steps to exit it. Please download the stock rom for the Non - LTE version if you have it. Your device should be listed as either Qualcomm HS-USB QDLoader 9008 or QHUSBBULK. Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Needed files to enter download mode to flash a stock rom : Files for Download Mode QDLoader HS USB Driver : 圆4 driver or x32 driverīoot repair tool : I9505 Boot repair tool

#LG LS775 QUALCOMM HS USB QDLOADER 9008 DRIVERS#

If everything was done correctly you’ll see your device correctly identified in device manager.Īfter drivers are successfully installed you can proceed with further manipulations with your had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.įirst of all,i did it on Windows 8.1 圆4.Now find the previously downloaded Qualcomm QDLoader driver package and select it.Select “Locate Drivers on this Device”.Right mouse click and select “Update Driver”.Open “Device Manager” on your PC and look for “QHSUSB_BULK” unknown device.And type the following commands one by one:.Now you need to boot your phone in EDL (Download mode).Connect your device via USB cable to PC.Open “Settings” > “Developer Settings” > “USB Debugging”.

#LG LS775 QUALCOMM HS USB QDLOADER 9008 ANDROID#

Enable USB debugging on your Android device.

Press “Next” and wait until installation is completed.

Download and install ADB & Fastboot drivers.

#LG LS775 QUALCOMM HS USB QDLOADER 9008 ARCHIVE#

Download the archive with required drivers.

#LG LS775 QUALCOMM HS USB QDLOADER 9008 HOW TO#

How to install manually install HS-USB QDLoader 9008 driver? Wait until installation is fully completed.If you’re using 32Bit OS, during setup select «Free Bld».You’ll find two different installers, one for 32bits and 64bits OS.Download archive with latest version of Qualcomm HS-USB QDLoader 9008 and unpack on your PC.How to install automatically install HS-USB QDLoader 9008? First and easy way is to use the automatic installer and the second way is to install drivers manually. There are two ways on how to install the Qualcomm HS-USB driver. The driver is available for different Windows OS versions including 7 & Windows 10. For example if you connect your Xiaomi device to PC and it isn’t identified, that basically means that your PC is missing the required driver. Advertisement Latest Version of Qualcomm HS-USB QDLoader 9008 DriverĪs you already know the installed Qualcomm driver on your PC is required for identifying and then flashing your smartphone device.

Lg ls775 qualcomm hs usb qdloader 9008